Firewalls: Securing NT Networks from Internet Intruders

MOST BUSINESSES TODAY have learned that an Internet connection sharpens their competitive edge by giving them (and their customers) timely access to information. But connecting to the Internet spawns a new set of responsibilities for IS departments: They must deliver reliable Internet services to corporate users while ensuring that systems and information stay secure from outside threats--such as hackers--that an Internet connection exposes them to. An important tool for protecting a corporate network from Internet intrusions is a firewall--an intelligent device that controls traffic between two or more networks for security purposes.

Just as a firewall blocks the spread of a real fire, a network firewall is a hardware/software barrier between a corporate network and the Internet. The firewall gives you control over who can access the connection and how they can access it. A firewall usually consists of a UNIX or Windows NT computer running special firewall software, though other hardware platforms such as routers can also run firewall software. Although this software is usually associated with Internet connections, you can use firewalls to control traffic between parts of an intranet or between networks of different corporations.

Before you set up a firewall, you need a risk analysis to determine whether your organization is a candidate for a firewall and you need to draft an Internet security policy. For information about these issues, see "Who Needs a Firewall?" page 120, and "Drafting an Internet Policy Document," page 125.

Firewall Features
Different organizations have different firewall needs. Based on those differing needs, firewall features fall into five major categories:

• basic requirements
• support for additional Internet services
• advanced security and control
• remote users and virtual private networking
• enterprise-level functionality

The rest of this article explores the significant issues in each category and examines the features specific to NT firewalls. (For more information about NT firewall products, see "Windows NT-based Firewall Vendors," page 122. And for information about National Computer Security Association--NCSA--certification for firewall products, see "Can Your Firewall Take the Heat? " page 124.)

Basic Requirements
A basic firewall lets corporate-network users access common Internet services while preventing unauthorized outside users from accessing internal systems. A firewall needs to let a security administrator set up rules for the types of allowed and prohibited connections. In addition, a firewall needs to ensure that internal IP addresses remain invisible to the Internet and allow the IP address range that you use inside the firewall to be different from and larger than your company's registered Class A, B, or C IP address range. (For more information on NT and IP addressing, see Mark Minasi, "How to Set Up IP," February 1996; "IP Routing with NT," March; "NT Workstations Using an IP Router," May; and "DHCP and Assigning IP Addresses," August.)

Firewalls also log network activity in detail, filter the log to produce meaningful reports, and alert a network administrator when the network has reached a predefined suspicious-activity threshold. Make sure your firewall software supports at least the following Internet services: Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP), Gopher, Simple Mail Transfer Protocol (SMTP), Telnet. Your firewall also needs a way to provide Domain Name System (DNS) name resolution (preferably by letting you run DNS on the firewall and on an internal system).

In addition, a basic firewall system needs to be easy to use. In particular, adding rules to firewall software needs to be easy and, more important, examining and understanding previously entered rules needs to be easy.

A firewall should have a graphical interface, especially if the firewall will be administered by a staff member who is used to NT. Finally, a firewall needs high-quality documentation that clearly explains how to configure each type of Internet service and explains address-related issues such as setting up DNS and configuring Web browsers.

Packet Filters and Proxy Systems
The two main methods for providing a basic firewall are packet filters and proxy systems. A packet filter is a device (usually a router with traffic-filtering capabilities) that controls traffic based on the IP source/destination addresses and the TCP source/destination port in the header information of each TCP/IP packet sent across a network (a port is a number that identifies the service the packet is using). For example, you can set up a traffic filter on a router that allows IP traffic only with a source or destination IP address that corresponds to the Dynamic Host Configuration Protocol (DHCP) scope you use for client workstations. You can add another filter that specifically disallows TCP port 139, the port number NetBIOS uses for connections over TCP/IP--the port number Windows clients use to log on to servers (remember that even NT Workstation clients can run the NT Server service). Finally you can filter User Datagram Protocol (UDP) on ports 137 and 138, which NT uses to advertise computer names and related information. With these steps, you build a simple packet filter that goes some of the way toward preventing outsiders from directly connecting to an internal server, while allowing internal users to access Internet services.

   Previous  [1]  2  3  4  Next